Products
SCBH15 10kv 11kv Amorphous Metal Three Phase Oil Immersed Power TransformerDry t
· remarkable energy-saving effect, no-load loss is only 25% to 35% of that of conventional products;

· superior performance, safe, reliable and environmental protection;

· NOMEX insulation system, no combustion, explosion proof, no pollution, fire protection grade, coil use, long service life, recyclable;

· high mechanical strength, strong ability to withstand short circuit, safe and reliable operation;

.Low noise, easy installation and maintenance free.

· low partial discharge, high insulation level and long service life of the product;

 

· excellent "three defense" ability, no cracking phenomenon;

 

· strong overload capacity, with long-term safe operation under 120% load.

 

 

· 节能效果显著, 空载损耗只有常规产品的25%-35%;
· 性能优越、产品安全、 可靠、 环保;
· 采用NOMEX绝缘系统, 不助燃、防爆、 无污染、防火等级寓,线圈使用、使用寿命长, 可回收;
· 机械强度高, 承受短路能力强, 运行安全可靠;
.噪音低、 安装筒便、 免维护。
· 局部放电量小、 绝缘水平高、产品使用寿命长;

· 三防” 能力极佳, 无龟裂现象;

· 过载能力强, 120%负荷下, 可长期安全运行。

Amorphous alloy dry type transformer no-load loss ratio GB/T10228 table 4 group l reduce 75%, load loss ratio GB/T10228 table 15%, is the most advanced energy-saving dry type transformer.The dry type transformer is oil-free and free from combustion hazard. It is installed indoors and can penetrate into the load center to meet the needs of the development of modern large cities with high density load.

This product has the advantages of low no-load loss, no oil, flame retardant self-extinguishing, lake resistant, crack resistant and maintenance free.All modern practical ordinary dry change places can be replaced by amorphous dry change, can be used for high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises and power plants.Especially suitable for dry inflammable, explosive and other places with high fire rating requirements.

      

 

非晶合金干式变压器空载损耗比GB/T10228表4组l降低75%,负载损耗比GB/T10228表降低15%,是当代最先进的节能型干式变压器。干式变压器无油,没有燃烧的危险,安装在室内,可深入负荷中心,以适应高密度负荷的现代化大城市发展的需要。

      本产品具有空载损耗低、无油、阻燃自熄、耐湖、抗裂和免维修等优点。凡是现代实用普通干变的场所都可由非晶干变所取代,可用于高层建筑、商业中心、地铁、机场、幸站、工矿企业和发电厂。特别适合干易燃、易爆等防火等级要求高的场所安装使用。
The low-pressure anchor coil of this product is made of copper anchor, and the high-voltage coil is made of h-class rich and strong enameled wire, and is sealed with epoxy resin reinforced by glass fiber, which has excellent moisture resistance and crack resistance.      

本产品低压锚式线圈,采用铜锚绕制,高压线圈用H级富强度漆包线绕制,采用玻璃纤维加强的环氧树脂包封结构,具有优良的耐潮和抗裂性能:铁芯由非晶合金带材卷制而成,采用矩形截面、四框无柱式结构。

Technical parameters of 10kV silver SC(B)H15 series amorphous alloy resin insulated dry type transformer 
Rated capacity (kvA) Voltage combination connectionism loss Impedance voltage Insulation class weight Overall dimensions gauge
Longitudinal/transverse
HV LV Light load No-load current %
100 11
10.5
10
6.3
6
0.4 Dyn11
OR
Yyno
0.013 1.570 0.8 4
6
F/F 890 950×600×960 550×550
160 0.017 2.100 0.8 1170 1220×600×1060 550×550
200 0.200 2.500 0.7 1400 1270×710×1160 660×60
250 0.230 2.750 0.7 1560 1350×760×1240 660×660
315 0.280 3.460 0.6 1770 1370×870×1260 820×820
400 0.300 3.980 0.6 2180 1460×870×1360 820×820
500 0.360 4.870 0.6 2440 1490×870×1430 820×820
630 0.420 5.870 0.5 2850 1760×1120×1490 1070×1070
800 0.480 6.950 0.5 3430 1850×1200×1610 1070×1070
1000 0.550 8.100 0.4 4050 1900×1120×1170 1070×1070
1250 0.660 9.700 0.4 4690 2030×1120×1880 1070×1070
1600 0.750 11.70   5610 2100×1120×1970 1070×1070
2000 1.040 14.45   5910 2120×1120×1990 1070×1070
2500 1.250 17.17   6730 2190×1120×2110 1070×1070
 

联系
width